Blower Wheel Puller P-0075

$ 22.50

Description

The Blower Wheel Puller is specifically sized to fit the blower wheel off the GARN induced draft motor

  • Loosen the set screw on the motor shaft
  • Thread the two side bolts into the blower wheel
  • Turn the center bolt until the wheel is free from the shaft
  • Makes getting the blower wheel off the motor very easy!

A 1/4-20 tap is included to clean out the threads on the blower wheel hub prior to securing the bolts.

Additional information

Weight 1 lbs
Dimensions 3 x 3 x 1 in